FAQ: Why not buy cheaper VCT tile?

VCT tile vs. SVT tile: lifetime cost vs. effectiveness

Heel straps worn
ESD Heel Straps: Some form of ESD footwear must be used in conjunction with ESD vinyl floors.

Vinyl Composition Tile (VCT), such as static-dissipative vinyl (SDT) is comprised of ordinary static-generating PVC, in combination with fillers like clay and limestone, and a chemical, known as an amine, to provide static-dissipative properties. While amines make the floor groundable, regular VCT is highly static generating.

When shoe soles contact and separate from VCT as people walk, static builds. To prevent static from building on people or objects—such as rolling carts or chairs—the floor must be waxed regularly, with three to five coats of antistatic polish. And everyone who walks on the VCT floor must wear special static-protective footwear—ESD shoes or conductive heel or toe straps, a requirement that is routine in electronics manufacturing facilities, but would be difficult if not impossible to enforce in most mission-critical spaces.

Heel straps worn
ESD Heel Straps: Some form of ESD footwear must be used in conjunction with ESD vinyl floors.

 

Vinyl Composition Tile (VCT), such as static-dissipative vinyl (SDT) is comprised of ordinary static-generating PVC, in combination with fillers like clay and limestone, and a chemical, known as an amine, to provide static-dissipative properties. While amines make the floor groundable, regular VCT is highly static generating.

When shoe soles contact and separate from VCT as people walk, static builds. To prevent static from building on people or objects—such as rolling carts or chairs—the floor must be waxed regularly, with three to five coats of antistatic polish. And everyone who walks on the VCT floor must wear special static-protective footwear—ESD shoes or conductive heel or toe straps, a requirement that is routine in electronics manufacturing facilities, but would be difficult if not impossible to enforce in most mission-critical spaces.

Cost

Floor cleaning
Routine waxing can add substantial maintenance costs to a VCT floor.
The initial cost of VCT is low. The ESD wax necessary to keep the tile from generating static is expensive. Maintenance costs quickly accumulate, negating any money saved on the original VCT. In other words, while the initial investment is small, the total, or long-term, cost of ownership is much higher than products requiring less maintenance. Conductive solid vinyl ESD tile (SVT) has a higher initial price tag, but SVT, uniform throughout the thickness of the tile, requires only periodic buffing to maintain its appearance.
Floor cleaning
Routine waxing can add substantial maintenance costs to a VCT floor.

 

The initial cost of VCT is low. The ESD wax necessary to keep the tile from generating static is expensive. Maintenance costs quickly accumulate, negating any money saved on the original VCT. In other words, while the initial investment is small, the total, or long-term, cost of ownership is much higher than products requiring less maintenance.

Conductive solid vinyl ESD tile (SVT) has a higher initial price tag, but SVT, uniform throughout the thickness of the tile, requires only periodic buffing to maintain its appearance.

Static-Control

ANSI/ESD S20.20 requires a system resistance measurement below 1.0 X 10E9 ohms. System resistance is the aggregate resistance of the person, footwear, flooring, floor coatings like waxes and polish, and the connection to ground. As the primary ESD flooring surface, the ESD wax must measure well below one billion ohms (< 1.0 X 10E9) at all times. Manufacturers of ESD wax, however, guarantee a measurement of < 1.0 x 10E10 ohms only on newly applied waxes.

Graphic labeled “System Resistance to Ground”. The illustration below shows a woman (labeled “Person wearing ESD shoes”) holding a wand (labeled “Metal want”). The floor beneath her has the ground symbol extending from it and is labeled “Grounded ESD floor”. The metal wand is connected to an ohmmeter (labeled “Wide ranging ohmmeter”). The ohmmeter also has a connection to ground.
In the qualification phase—before purchasing a VCT floor—the material should be tested for system resistance, which must measure under 1.0 x 10E9 to meet ESD Standards.
Graphic labeled “System Resistance to Ground”. The illustration below shows a woman (labeled “Person wearing ESD shoes”) holding a wand (labeled “Metal want”). The floor beneath her has the ground symbol extending from it and is labeled “Grounded ESD floor”. The metal wand is connected to an ohmmeter (labeled “Wide ranging ohmmeter”). The ohmmeter also has a connection to ground.
In the qualification phase—before purchasing a VCT floor—the material should be tested for system resistance, which must measure under 1.0 x 10E9 to meet ESD Standards.

ANSI/ESD S20.20 also requires a walking body voltage, tested per STM 97.2, to measure under 100 volts—a standard static-dissipative VCT tile does not and cannot meet this criterion.

Resistance test and walking body voltage test
VCT floors must be tested regularly to ensure that they meet ESD industry standards for resistance and walking body voltage.
Resistance test and walking body voltage test
VCT floors must be tested regularly to ensure that they meet ESD industry standards for resistance and walking body voltage.

Permanent Static Control

Illustration of a man wax a floor with a buffing machine with a big red cross through the image. The text to the right of him reads "Static-control floors should perform according to ESD industry standard–without the application of special static-control waxes or finishes."

Any ESD flooring material that gains electrical properties from antistatic sprays or special waxes does not provide permanent static protection. Once the coating wears off, the floor loses its static-protective properties, exposing electronics to the hazards of random static discharge. There is no visible indication that the wax or polish is no longer performing. Unless the maintenance crew or someone in the facility is committed to testing the floor on a regular basis, there’s no way to know when the floor has stopped functioning. For peace of mind, it’s best to avoid these materials.

This article, published by In Compliance Magazine, details the key 2014 revisions in ANSI/ESD S20.20.

Twitter
LinkedIn
Facebook
Reddit
Pinterest
Email

More FAQs

Background graphic is a still from the StaticWorx GroundSafe ESD Flooring – Your Trusted Partner explainer animation. In the foreground at the bottom are two boxes. The top is a bright blue with the StaticWorx logo and "GroundSafe ESD Flooring" underneath in white. The second is a dark blue-gray and includes the text in white: “GroundWorx ESD Flooring – Your Trusted Partner”
Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.