ShadowFX Static-dissipative (SD) Carpet Tile: Peaks Series
Information
- 10 Reasons SD Carpet is Better Value Than Hard Surface SD Tiles
- 5 Reasons to Use Vermont Slate ESD Carpet Tile in 24/7 Critical Environments
- 7 Ways ShadowFX ESD Carpet Tile Differs from Commercial Tile
- ESD Carpet: Preventing Electrostatic Discharge
- Premium Helix Monofilament Fibers
- ShadowFX and ESD Standards
- ShadowFX Carpet Fiber Shape and Modification Ratio
- ShadowFX Static-Dissipative Carpet Tile: FAQs
- Why is ShadowFX Carpet Static Dissipative and Not Conductive?
Installation, Cleaning and LEED Information
Like the stately summits of Vermont, our Peaks series carpet tile combines natural beauty with zen-like tranquility. Elegant in pattern and texture, with colorways in both warm and cool tones, our Peaks collection gives you a floor with dimension, functionality, and character.
ShadowFX ESD carpet tile is made by an industry leader in the development of flooring made using recycled materials and 100% Carbon Neutral for the total life cycle.
Key Benefits
- Promotes tranquility
- Architectural appeal
- Neutral colorways
- Warm and cool tones
- Non-directional installation
- Hides pile crush and wear
- Easy to repair and replace
- Universal appeal
- Glue-free with TacTiles
- Can be installed over raised floors
- Promotes tranquility
- Architectural appeal
- Neutral colorways
- Warm and cool tones
- Non-directional installation
- Hides pile crush and wear
- Easy to repair and replace
- Universal appeal
- Glue-free with TacTiles
- Can be installed over raised floors
Available Styles
Note: Material colors should not be selected based solely on computer images:
Actual product colors may vary from the way colors display on your monitor. Before making selections, verify the color by ordering a sample from our site. Colorways used in random non-directional ESD carpet styles such as ShadowFX Patterns, Cubic, Peaks, Fields and Stone, and Vermont Slate vary from tile to tile. This is intentional and allows for non-directional installation. If you have any questions, please call: 617-923-2000 Or send an e-mail to [email protected]
Standard Size: 50cm x 50cm (19.69″ x 19.69″)
Available in 24″ x 24″ for one-to-one access floor installation
Installation: Non-directional
| Conductive Fiber | StaticWorx Helix 44 Denier Conductive Fiber. |
| kV Rating | AATCC 134-1996 electrostatic propensity: less than 0.4 kV (400 volts). Tested at 12% relative humidity at 20°C and 70°F. |
| Body Voltage Generation (BVG) Per ANSI/ESD S97.2 | Voltage on person in combination with grounded carpet tile < 100 volts. Meets ANSI/ESD S20.20 requirements for use in EPAs in electronics manufacturing. |
| ESD S7.1/NFPA 99 Resistance Characterization of Materials | Nine or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. |
| ESD S7.1/NFPA 99 Resistive Characterization of Materials | Nine or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. Meets Motorola R56 and ATIS-0600321 for use in telecommunications applications. Meets FAA STD 019f for use in flight control applications. |
| Electrical Resistance/Voltage Test ANSI/ESD S20.20 | Approved for use in EPAs in electronics manufacturing with approved footwear system. Results within recommended range < 3.5 x 10E7 ohms and < 100 volts. |
| D.O.D. HDBK263A, Section 40.1.2 | Meets recommended guidelines for sensitive ESD devices, Class 1. |
| Roller Caster Electrical Test (CET) | Product meets ANSI/ESD S20.20 after 125,000 cycles. |
| Groundable Path | Copper ground strip. |
| Grounding Frequency | 1 per 1,000 sq. ft. |
| Backing System | Permanent static-dissipative backing. |
| Adhesives | Use only StaticWorx-approved conductive adhesives. GroundTack pressure sensitive. TacTiles glue-free self-stick connectors for adhesive-free installation over raised access floors. |
| Product Specification | ShadowFX™ Peaks |
|---|---|
| Country Manufactured | United States |
| Static Control Fiber | Continuous Static Dissipative StaticWorx® 44 denier helix fiber. |
| Yarn System | Post-consumer content nylon |
| Yarn Manufacturer | Universal |
| Total Recycled Content | 60% |
| Post-Industrial | 58% |
| Post-Consumer | 2% |
| Embodied Carbon (Cradle to Gate) | 6.58 Kg CO2/M2 |
| Full Life Cycle Carbon Emissions | Certified Carbon Neutral Floors™ |
| Yarn Construction | Tufted textured loop |
| Dye Method | 100% Solution Dyed |
| Dye Lots | Mergeable |
| Manufacturing Process | Tufted |
| Gauge | 1/12 in |
| Tufted Stitches Per Inch | 10/in |
| Tufted Pile Height | 0.14 in |
| Tufted Yarn Weight | 17 oz/yd2 |
| Pile Thickness | 0.1 in |
| Pile Density/ | 6,120 oz/yd3 |
| Fiber Modification Ratio | 1.7 to 1.9 |
| Tile Size | 50 cm x 50 cm (19.69″ x 19.69″) Available in 24″ x 24″ |
| Radiant Panel | Class 1 (ASTM E 648) passes |
| Smoke Density | ≤ 450 (ASTM E 662) |
| Flammability | Passes Methenamine Pill Test (DOC-FF1-70) |
| Lightfastness | ≥ 4.0 @ 60 AFUs (AATCC 16 – E) |
| Dimensional Stability | AACHEN Din 54318 < . 10% |
| Traffic Classification | Severe |
| Soil Stain Protection | Protekt2® |
| Preservative Protection | Intersept® |
| Preservative Efficacy | (AATCC 174 Parts 2&3) 99% Reduction/ No Mold 7 Days (ASTM E-2471) Complete Inhibition |
| Electrostatic Propensity | < 0.4 kV (AATCC 134-1996) Tested at 12% relative humidity at 20°C and 70°F. |
| Glue-free Installations | Use GroundBridge™ underlayment with Interface TacTiles® |
| Crockfastness | AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 5 wet and dry. |
| Atmospheric Fading | AATCC Test Method 129 Ozone/AATCC Test Method 23, Burned Gas shall not be less than 3 on International Grey Scale after two cycles on each test. |
Made in an environmentally-controlled facility, our static-dissipative carpet tile contains 50 percent recycled content, and every yarn bundle is wrapped with Helix 44-denier static-control fiber. With random directionality and durable fiber, StaticWorx carpet looks attractive, even in heavy traffic areas, and lasts longer than most carpet on the market.
StaticWorx carpet tile is Green Label Plus-certified, designated to carpets identified with very low emissions of volatile organic compounds (VOCs) by an independent testing program. This program is an enhancement of the Carpet and Rug Institutes’ Green Label Carpet Testing Program and establishes the highest standard for indoor air quality (IAQ) ever set by the carpet industry.
Sustainability
May earn LEED points toward satisfying the U.S. Green Building Council (USGBC) LEED® Green Building Additional Anti Static Flooring Sustainability Fact Sheets Rating System™ including:
- LEED Materials and Resources: Recycled Content Credit 4.1 and 4.2
- LEED Materials and Resources: Local/Regional Materials (Contact us for more specific information)
- LEED Indoor Environmental Quality: Low Emitting Materials Credit 4.3.
Other “green” qualities of this ESD carpet tile include:
- Low VOCs / off gassing of benign emissions:
- Awarded The Carpet and Rug Institute’s Green Label Plus certification for low chemical emissions with certifications under GLP0820
- Private Office Range of Total VOCs: 0.5mg/m3 or less
- School Classroom Range of Total VOCs: 0.5mg/m3 or less
- Installed using environmentally friendly, low off gassing adhesives
- Recyclable Packaging
- Eco-friendly Manufacturing Methods
| Conductive Fiber | StaticWorx Helix 44 Denier Conductive Fiber. |
| kV Rating | AATCC 134-1996 electrostatic propensity: less than 0.4 kV (400 volts). Tested at 12% relative humidity at 20°C and 70°F. |
| Body Voltage Generation (BVG) Per ANSI/ESD S97.2 | Voltage on person in combination with grounded carpet tile < 100 volts. Meets ANSI/ESD S20.20 requirements for use in EPAs in electronics manufacturing. |
| ESD S7.1/NFPA 99 Resistance Characterization of Materials | Nine or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. |
| ESD S7.1/NFPA 99 Resistive Characterization of Materials | Nine or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. Meets Motorola R56 and ATIS-0600321 for use in telecommunications applications. Meets FAA STD 019f for use in flight control applications. |
| Electrical Resistance/Voltage Test ANSI/ESD S20.20 | Approved for use in EPAs in electronics manufacturing with approved footwear system. Results within recommended range < 3.5 x 10E7 ohms and < 100 volts. |
| D.O.D. HDBK263A, Section 40.1.2 | Meets recommended guidelines for sensitive ESD devices, Class 1. |
| Roller Caster Electrical Test (CET) | Product meets ANSI/ESD S20.20 after 125,000 cycles. |
| Groundable Path | Copper ground strip. |
| Grounding Frequency | 1 per 1,000 sq. ft. |
| Backing System | Permanent static-dissipative backing. |
| Adhesives | Use only StaticWorx-approved conductive adhesives. GroundTack pressure sensitive. TacTiles glue-free self-stick connectors for adhesive-free installation over raised access floors. |
| Product Specification | ShadowFX™ Peaks |
|---|---|
| Country Manufactured | United States |
| Static Control Fiber | Continuous Static Dissipative StaticWorx® 44 denier helix fiber. |
| Yarn System | Post-consumer content nylon |
| Yarn Manufacturer | Universal |
| Total Recycled Content | 60% |
| Post-Industrial | 58% |
| Post-Consumer | 2% |
| Embodied Carbon (Cradle to Gate) | 6.58 Kg CO2/M2 |
| Full Life Cycle Carbon Emissions | Certified Carbon Neutral Floors™ |
| Yarn Construction | Tufted textured loop |
| Dye Method | 100% Solution Dyed |
| Dye Lots | Mergeable |
| Manufacturing Process | Tufted |
| Gauge | 1/12 in |
| Tufted Stitches Per Inch | 10/in |
| Tufted Pile Height | 0.14 in |
| Tufted Yarn Weight | 17 oz/yd2 |
| Pile Thickness | 0.1 in |
| Pile Density/ | 6,120 oz/yd3 |
| Fiber Modification Ratio | 1.7 to 1.9 |
| Tile Size | 50 cm x 50 cm (19.69″ x 19.69″) Available in 24″ x 24″ |
| Radiant Panel | Class 1 (ASTM E 648) passes |
| Smoke Density | ≤ 450 (ASTM E 662) |
| Flammability | Passes Methenamine Pill Test (DOC-FF1-70) |
| Lightfastness | ≥ 4.0 @ 60 AFUs (AATCC 16 – E) |
| Dimensional Stability | AACHEN Din 54318 < . 10% |
| Traffic Classification | Severe |
| Soil Stain Protection | Protekt2® |
| Preservative Protection | Intersept® |
| Preservative Efficacy | (AATCC 174 Parts 2&3) 99% Reduction/ No Mold 7 Days (ASTM E-2471) Complete Inhibition |
| Electrostatic Propensity | < 0.4 kV (AATCC 134-1996) Tested at 12% relative humidity at 20°C and 70°F. |
| Glue-free Installations | Use GroundBridge™ underlayment with Interface TacTiles® |
| Crockfastness | AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 5 wet and dry. |
| Atmospheric Fading | AATCC Test Method 129 Ozone/AATCC Test Method 23, Burned Gas shall not be less than 3 on International Grey Scale after two cycles on each test. |
Made in an environmentally-controlled facility, our static-dissipative carpet tile contains 50 percent recycled content, and every yarn bundle is wrapped with Helix 44-denier static-control fiber. With random directionality and durable fiber, StaticWorx carpet looks attractive, even in heavy traffic areas, and lasts longer than most carpet on the market.
StaticWorx carpet tile is Green Label Plus-certified, designated to carpets identified with very low emissions of volatile organic compounds (VOCs) by an independent testing program. This program is an enhancement of the Carpet and Rug Institutes’ Green Label Carpet Testing Program and establishes the highest standard for indoor air quality (IAQ) ever set by the carpet industry.
Sustainability
May earn LEED points toward satisfying the U.S. Green Building Council (USGBC) LEED® Green Building Additional Anti Static Flooring Sustainability Fact Sheets Rating System™ including:
- LEED Materials and Resources: Recycled Content Credit 4.1 and 4.2
- LEED Materials and Resources: Local/Regional Materials (Contact us for more specific information)
- LEED Indoor Environmental Quality: Low Emitting Materials Credit 4.3.
Other “green” qualities of this ESD carpet tile include:
- Low VOCs / off gassing of benign emissions:
- Awarded The Carpet and Rug Institute’s Green Label Plus certification for low chemical emissions with certifications under GLP0820
- Private Office Range of Total VOCs: 0.5mg/m3 or less
- School Classroom Range of Total VOCs: 0.5mg/m3 or less
- Installed using environmentally friendly, low off gassing adhesives
- Recyclable Packaging
- Eco-friendly Manufacturing Methods
Further Reading
In this hub, focused specifically on installation and maintenance, you’ll find accurate information on grounding, installing, and maintaining ESD flooring.
ShadowFX Static-dissipative (SC) Carpet Tile Collections
Lo