ShadowFX Static-dissipative (SD) Carpet Tile: Parks Series
Information
- 10 Reasons SD Carpet is Better Value Than Hard Surface SD Tiles
- 5 Reasons to Use Vermont Slate ESD Carpet Tile in 24/7 Critical Environments
- 7 Ways ShadowFX ESD Carpet Tile Differs from Commercial Tile
- ESD Carpet: Preventing Electrostatic Discharge
- Premium Helix Monofilament Fibers
- ShadowFX and ESD Standards
- ShadowFX Carpet Fiber Shape and Modification Ratio
- ShadowFX Static-Dissipative Carpet Tile: FAQs
- Why is ShadowFX Carpet Static Dissipative and Not Conductive?
Installation, Cleaning and LEED Information
In earthy colors with threads of complementary colors in varying widths, our Parks Series carpet tile mimics the beautiful simplicity of a natural park. Due to its low-profile face, our Parks Series carpet tile uses less material to create a linear floor that’s both upscale and tailored.
Can be installed quarter turn or brick.
ShadowFX ESD carpet tile is made by an industry leader in the development of flooring made using recycled materials and 100% Carbon Neutral for the total life cycle.
Key Benefits
- Low-profile face
- Natural earthy colors
- Classic, tailored appeal
- Design simplicity
- Linear pattern
- Universal appeal
- Low-profile face
- Natural earthy colors
- Classic, tailored appeal
- Design simplicity
- Linear pattern
- Universal appeal
Available Styles
Note: Material colors should not be selected based solely on computer images:
Actual product colors may vary from the way colors display on your monitor. Before making selections, verify the color by ordering a sample from our site. Colorways used in random non-directional ESD carpet styles such as ShadowFX Patterns, Cubic, Peaks, Fields and Stone, and Vermont Slate vary from tile to tile. This is intentional and allows for non-directional installation. If you have any questions, please call: 617-923-2000 Or send an e-mail to [email protected]
Standard Size: 50cm x 50cm (19.69″ x 19.69″)
Available in 2’ x 2’ for one-to-one access floor installation
Also available 1m x 1m (special order).
Installation: Brick
Quarter Turn
| Conductive Fiber | StaticWorx Helix 44 Denier Conductive Fiber. |
| kV Rating | AATCC 134-1996 electrostatic propensity: less than 0.4 kV (400 volts). Tested at 12% relative humidity at 20°C and 70°F. |
| Body Voltage Generation (BVG) Per ANSI/ESD S97.2 | Voltage on person in combination with grounded carpet tile < 100 volts. Meets ANSI/ESD S20.20 requirements for use in EPAs in electronics manufacturing. |
| ESD S7.1/NFPA 99 Resistance Characterization of Materials | Nine or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. |