
ShadowFX Patterns and Cubic Collections
Non-directional Installation for Less Installation Waste
ShadowFX SDC Patterns and Cubic Collections offer the added benefit of non-directional installation, meaning that tiles can be laid in any order or orientation. With no set pattern to maintain and no need to align tiles in a certain direction, there is significantly less installation waste. In fact, the average ShadowFX non-directional installation produces only 1.5% waste as opposed to an average of 14% for other carpet styles. So more of your floorcovering investment is on your floor – not in a dumpster.
All ShadowFX carpet tiles can be installed without glue – as a floating floor – over any hard surface.
ShadowFX Patterns and Cubic Collections
Non-directional Installation for Less Installation Waste
ShadowFX SDC Patterns and Cubic Collections offer the added benefit of non-directional installation, meaning that tiles can be laid in any order or orientation. With no set pattern to maintain and no need to align tiles in a certain direction, there is significantly less installation waste. In fact, the average ShadowFX non-directional installation produces only 1.5% waste as opposed to an average of 14% for other carpet styles. So more of your floorcovering investment is on your floor – not in a dumpster.
All ShadowFX carpet tiles can be installed without glue – as a floating floor – over any hard surface.
Key Benefits
- Hides pile crush and wear
- No need to match dye lots
- Replacement tiles indistinguishable from older/original tiles
- Requires less attic stock
- Non-directional installation (no matching)
- 1.5% installation wasted (14% average other styles
- Can be installed over any hard surface, glue-free
- Can be installed over raised floors
Available Styles: Patterns
Available Styles: Cubic
Standard Size: 50cm x 50cm (19.69″ x 19.69″)
Available in 2’ x 2’ for one-to-one access floor installation
Installation: Non-Directional

































Information and Downloads
Conductive Fiber | StaticWorx Helix 44 Denier Conductive Fiber. |
kV Rating | AATCC 134-1996 electrostatic propensity: less than 0.4 kV (400 volts). Tested at 12% relative humidity at 20°C and 70°F. |
Body Voltage Generation (BVG) Per ANSI/ESD S97.2 | Voltage on person in combination with grounded carpet tile < 50 volts [Cubics] or < 100 volts [Patterns]. Meets ANSI/ESD S20.20-2014 requirements for use in EPAs in electronics manufacturing. |
ESD S7.1/NFPA 99 Resistance Characterization of Materials | Nine or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. |
ESD S7.1/NFPA 99 Resistive Characterization of Materials | Nine or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. Meets Motorola R56 and ATIS-0600321 for use in telecommunications applications. Meets FAA STD 019f for use in flight control applications. |
Electrical Resistance/Voltage Test ANSI/ESD S20.20 | Approved for use in EPAs in electronics manufacturing with approved footwear system. Results within recommended range < 3.5 x 10E7 ohms and < 100 volts. |
D.O.D. HDBK263A, Section 40.1.2 | Meets recommended guidelines for sensitive ESD devices, Class 1. |
Roller Caster Electrical Test (CET) | Product meets ANSI/ESD S20.20 after 125,000 cycles. |
Groundable Path | Copper ground strip. |
Grounding Frequency | 1 per 1,000 sq. ft. |
Backing System | Permanent static-dissipative backing. |
Adhesives | Use only StaticWorx-approved conductive adhesives. GroundTack pressure sensitive. TacTiles glue-free self-stick connectors for adhesive-free installation over raised access floors. |
Product Specification | ShadowFX™ Patterns | ShadowFX™ Cubic |
---|---|---|
Country Manufactured | United States | United States |
Static Control Fiber | Continuous Static Dissipative StaticWorx® 44 denier helix fiber. | Continuous Static Dissipative StaticWorx® 44 denier helix fiber. |
Yarn System | Post-consumer content Type 6, 6 branded nylon | Post-consumer content Type 6, 6 branded nylon |
Yarn Manufacturer | Universal | Aquafil |
Total Recycled Content | 58% | 68% |
Post-Industrial | 56% | 58% |
Post-Consumer | 2% | 10% |
Embodied Carbon (Cradle to Gate) | 6.58 Kg CO2/M2 | 7.31 Kg CO2/M2 |
Full Life Cycle Carbon Emissions | Certified Carbon Neutral Floors™ | Certified Carbon Neutral Floors™ |
Yarn Construction | Tufted Textured Loop | Tufted Textured Loop |
Dye Method | 100% Solution Dyed | 100% Solution Dyed |
Dye Lots | Mergeable | Mergeable |
Manufacturing Process | Tufted | Tufted |
Gauge | 1/12 in | 1/12 in |
Tufted Stitches Per Inch | 7.7/in | 8.2/in |
Tufted Pile Height | 0.12 in | 0.14 in |
Tufted Yarn Weight | 15 oz/yd2 | 18 oz/yd2 |
Pile Thickness | 0.074 in | 0.093 in |
Pile Density/ | 7,297 oz/yd3 | 6,968 oz/yd3 |
Fiber Modification Ratio | 1.7 to 1.9 | 1.9 to 2.2 |
Tile Size | 50 cm x 50 cm (19.69″ x 19.69″) Available in 24″ x 24″ | 50 cm x 50 cm (19.69″ x 19.69″) Available in 24″ x 24″ |
Radiant Panel | Class 1 (ASTM E 648) passes | Class 1 (ASTM E 648) passes |
Smoke Density | ≤ 450 (ASTM E 662) | ≤ 450 (ASTM E 662) |
Flammability | Passes Methenamine Pill Test (DOC-FF1-70) | Passes Methenamine Pill Test (DOC-FF1-70) |
Lightfastness | ≥ 4.0 @ 60 AFUs (AATCC 16 – E) | ≥ 4.0 @ 60 AFUs (AATCC 16 – E) |
Dimensional Stability | AACHEN Din 54318 < . 10% | AACHEN Din 54318 < . 10% |
Traffic Classification | Severe, 24/7 and Factory rated | Severe, 24/7 and Factory rated |
Soil Stain Protection | Protekt2® | Protekt2® |
Preservative Protection | Intersept® | Intersept® |
Preservative Efficacy | (AATCC 174 Parts 2&3) 99% Reduction/ No Mold 7 Days (ASTM E-2471) Complete Inhibition | (AATCC 174 Parts 2&3) 99% Reduction/ No Mold 7 Days (ASTM E-2471) Complete Inhibition |
Electrostatic Propensity | < 0.4 kV (AATCC 134-1996) Tested at 12% relative humidity at 20°C and 70°F. | < 0.4 kV (AATCC 134-1996) Tested at 12% relative humidity at 20°C and 70°F. |
Glue-free Installations | Use GroundBridge™ underlayment with Interface TacTiles® | Use GroundBridge™ underlayment with Interface TacTiles® |
Crockfastness | AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 5 wet and dry. | AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 5 wet and dry. |
Atmospheric Fading | AATCC Test Method 129 Ozone/AATCC Test Method 23, Burned Gas shall not be less than 3 on International Grey Scale after two cycles on each test. | AATCC Test Method 129 Ozone/AATCC Test Method 23, Burned Gas shall not be less than 3 on International Grey Scale after two cycles on each test. |
Made in an environmentally-controlled facility, our static-dissipative carpet tile contains 50 percent recycled content, and every yarn bundle is wrapped with Helix 44-denier static-control fiber. With random directionality and durable fiber, Staticworx carpet looks attractive, even in heavy traffic areas, and lasts longer than most carpet on the market.
Staticworx carpet tile is Green Label Plus-certified, designated to carpets identified with very low emissions of volatile organic compounds (VOCs) by an independent testing program. This program is an enhancement of the Carpet and Rug Institutes’ Green Label Carpet Testing Program and establishes the highest standard for indoor air quality (IAQ) ever set by the carpet industry.
Sustainability
May earn LEED points toward satisfying the U.S. Green Building Council (USGBC) LEED® Green Building Additional Anti Static Flooring Sustainability Fact Sheets Rating System™ including:
- LEED Materials and Resources: Recycled Content Credit 4.1 and 4.2
- LEED Materials and Resources: Local/Regional Materials (Contact us for more specific information)
- LEED Indoor Environmental Quality: Low Emitting Materials Credit 4.3.
Other “green” qualities of this ESD carpet tile include:
- Low VOCs / off gassing of benign emissions:
- Awarded The Carpet and Rug Institute’s Green Label Plus certification for low chemical emissions with certifications under GLP0820
- Installed using environmentally friendly, low off gassing adhesives
- Recyclable Packaging
- Eco-friendly Manufacturing Methods
Conductive Fiber | StaticWorx Helix 44 Denier Conductive Fiber. |
kV Rating | AATCC 134-1996 electrostatic propensity: less than 0.4 kV (400 volts). Tested at 12% relative humidity at 20°C and 70°F. |
Body Voltage Generation (BVG) Per ANSI/ESD S97.2 | Voltage on person in combination with grounded carpet tile < 50 volts [Cubics] or < 100 volts [Patterns]. Meets ANSI/ESD S20.20-2014 requirements for use in EPAs in electronics manufacturing. |
ESD S7.1/NFPA 99 Resistance Characterization of Materials | Nine or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. |
ESD S7.1/NFPA 99 Resistive Characterization of Materials | Nine or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in ohms, 1.0 x 10E6 – 1.0 x 10E9. Meets Motorola R56 and ATIS-0600321 for use in telecommunications applications. Meets FAA STD 019f for use in flight control applications. |
Electrical Resistance/Voltage Test ANSI/ESD S20.20 | Approved for use in EPAs in electronics manufacturing with approved footwear system. Results within recommended range < 3.5 x 10E7 ohms and < 100 volts. |
D.O.D. HDBK263A, Section 40.1.2 | Meets recommended guidelines for sensitive ESD devices, Class 1. |
Roller Caster Electrical Test (CET) | Product meets ANSI/ESD S20.20 after 125,000 cycles. |
Groundable Path | Copper ground strip. |
Grounding Frequency | 1 per 1,000 sq. ft. |
Backing System | Permanent static-dissipative backing. |
Adhesives | Use only StaticWorx-approved conductive adhesives. GroundTack pressure sensitive. TacTiles glue-free self-stick connectors for adhesive-free installation over raised access floors. |
Product Specification | ShadowFX™ Patterns | ShadowFX™ Cubic |
---|---|---|
Country Manufactured | United States | United States |
Static Control Fiber | Continuous Static Dissipative StaticWorx® 44 denier helix fiber. | Continuous Static Dissipative StaticWorx® 44 denier helix fiber. |
Yarn System | Post-consumer content Type 6, 6 branded nylon | Post-consumer content Type 6, 6 branded nylon |
Yarn Manufacturer | Universal | Aquafil |
Total Recycled Content | 58% | 68% |
Post-Industrial | 56% | 58% |
Post-Consumer | 2% | 10% |
Embodied Carbon (Cradle to Gate) | 6.58 Kg CO2/M2 | 7.31 Kg CO2/M2 |
Full Life Cycle Carbon Emissions | Certified Carbon Neutral Floors™ | Certified Carbon Neutral Floors™ |
Yarn Construction | Tufted Textured Loop | Tufted Textured Loop |
Dye Method | 100% Solution Dyed | 100% Solution Dyed |
Dye Lots | Mergeable | Mergeable |
Manufacturing Process | Tufted | Tufted |
Gauge | 1/12 in | 1/12 in |
Tufted Stitches Per Inch | 7.7/in | 8.2/in |
Tufted Pile Height | 0.12 in | 0.14 in |
Tufted Yarn Weight | 15 oz/yd2 | 18 oz/yd2 |
Pile Thickness | 0.074 in | 0.093 in |
Pile Density/ | 7,297 oz/yd3 | 6,968 oz/yd3 |
Fiber Modification Ratio | 1.7 to 1.9 | 1.9 to 2.2 |
Tile Size | 50 cm x 50 cm (19.69″ x 19.69″) Available in 24″ x 24″ | 50 cm x 50 cm (19.69″ x 19.69″) Available in 24″ x 24″ |
Radiant Panel | Class 1 (ASTM E 648) passes | Class 1 (ASTM E 648) passes |
Smoke Density | ≤ 450 (ASTM E 662) | ≤ 450 (ASTM E 662) |
Flammability | Passes Methenamine Pill Test (DOC-FF1-70) | Passes Methenamine Pill Test (DOC-FF1-70) |
Lightfastness | ≥ 4.0 @ 60 AFUs (AATCC 16 – E) | ≥ 4.0 @ 60 AFUs (AATCC 16 – E) |
Dimensional Stability | AACHEN Din 54318 < . 10% | AACHEN Din 54318 < . 10% |
Traffic Classification | Severe, 24/7 and Factory rated | Severe, 24/7 and Factory rated |
Soil Stain Protection | Protekt2® | Protekt2® |
Preservative Protection | Intersept® | Intersept® |
Preservative Efficacy | (AATCC 174 Parts 2&3) 99% Reduction/ No Mold 7 Days (ASTM E-2471) Complete Inhibition | (AATCC 174 Parts 2&3) 99% Reduction/ No Mold 7 Days (ASTM E-2471) Complete Inhibition |
Electrostatic Propensity | < 0.4 kV (AATCC 134-1996) Tested at 12% relative humidity at 20°C and 70°F. | < 0.4 kV (AATCC 134-1996) Tested at 12% relative humidity at 20°C and 70°F. |
Glue-free Installations | Use GroundBridge™ underlayment with Interface TacTiles® | Use GroundBridge™ underlayment with Interface TacTiles® |
Crockfastness | AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 5 wet and dry. | AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 5 wet and dry. |
Atmospheric Fading | AATCC Test Method 129 Ozone/AATCC Test Method 23, Burned Gas shall not be less than 3 on International Grey Scale after two cycles on each test. | AATCC Test Method 129 Ozone/AATCC Test Method 23, Burned Gas shall not be less than 3 on International Grey Scale after two cycles on each test. |
Made in an environmentally-controlled facility, our static-dissipative carpet tile contains 50 percent recycled content, and every yarn bundle is wrapped with Helix 44-denier static-control fiber. With random directionality and durable fiber, Staticworx carpet looks attractive, even in heavy traffic areas, and lasts longer than most carpet on the market.
Staticworx carpet tile is Green Label Plus-certified, designated to carpets identified with very low emissions of volatile organic compounds (VOCs) by an independent testing program. This program is an enhancement of the Carpet and Rug Institutes’ Green Label Carpet Testing Program and establishes the highest standard for indoor air quality (IAQ) ever set by the carpet industry.
Sustainability
May earn LEED points toward satisfying the U.S. Green Building Council (USGBC) LEED® Green Building Additional Anti Static Flooring Sustainability Fact Sheets Rating System™ including:
- LEED Materials and Resources: Recycled Content Credit 4.1 and 4.2
- LEED Materials and Resources: Local/Regional Materials (Contact us for more specific information)
- LEED Indoor Environmental Quality: Low Emitting Materials Credit 4.3.
Other “green” qualities of this ESD carpet tile include:
- Low VOCs / off gassing of benign emissions:
- Awarded The Carpet and Rug Institute’s Green Label Plus certification for low chemical emissions with certifications under GLP0820
- Installed using environmentally friendly, low off gassing adhesives
- Recyclable Packaging
- Eco-friendly Manufacturing Methods
Further Reading
In this hub, focused specifically on installation and maintenance, you’ll find accurate information on grounding, installing, and maintaining ESD flooring.
ShadowFX Static-dissipative (SC) Carpet Tile Collections
Looking for easy installation of Staticworx ESD Carpet Tile over your bare access floor panels?
ShadowFX SDC with TacTiles® is your solution.
- Installation economy - no adhesive required
- Guaranteed to meet all ESD standards for any application
- ShadowFX carpet tiles with dissipative backing are grounded upon contact with metal panels
Carpet tiles are easily lifted and replaced
With its simple, subtle texture and diversity of color options, Shadow FX SDC Solids is a popular choice for many styles of interior. It’s also ideal for mixing and matching with other Shadow FX SDC carpet tiles, to create accents, inserts, borders or checkerboard effects – a really useful, versatile tool for designers.
In sophisticated tones with threads of complementary colors in varying widths, our Parks Series carpet tile puts an earthy twist on classic linear design. A low-profile face uses less material for a tailored, upscale aesthetic.
Like the stately summits of Vermont, our Peaks series carpet tile combines natural beauty with zen-like tranquility. Elegant in pattern and texture, with colorways in both warm and cool tones, our Peaks collection gives you a floor with dimension, functionality, and character.
Simplicity Meets Style
Treez, our latest ShadowFX carpet tile collection, marries timeless style with the simplicity in nature. Tufted, textured loop construction adds dimension, creating a look as natural and stately as the bark on a tree. As appealing and comfortable in an uptown financial services space or high-tech lobby as in a workhorse application such as a data center or manufacturing facility.
ShadowFX SDC Chenille Warp Carpet is a tufted patterned level tip-sheared pile carpet tile, with SD backing. The pile material is made from recycled solution-dyed nylon. The fundamental aesthetic of Chenille is stripes which have been interpreted in a bold and textural way without relying on heavy face weight. Shadow FX Chenille Warp is available in colorways. The tiles can be installed in a variety of ways including quarter-turn, ashlar, brick fashion and parquet, with the potential to provide an unconventional appearance.
Linear precision, softened by texture and offset shapes.
As its name suggests, Furrows II has a resilient patterned loop pile carpet, reflecting the linear regularity of ploughed fields. Its textured, structured loop pile creates the three-dimensional impression of an aerial view of a cultivated landscape.
Designed for heavy contract performance, ShadowFX Furrows II maintains its distinctive appearance even in high-traffic areas. Pile yarn and backing contain pre-consumer recycled material, minimizing environmental impact.
Built to withstand heavy traffic and abuse and designed to address the most stringent static control requirements - making Vermont Slate ideal for any application from electronics manufacturing to labs to 24/7 critical environments.
StaticWorx Vermont Slate carpet-tile collection provides the durability and high performance you expect from StaticWorx floors in a design that transports you to the mountains of Vermont. Warm, monochromatic earth tones promote a peaceful environment, inspiring creativity and a sense of wellbeing and connectedness.
The rock-like etchings in our Vermont Slate carpet tiles flow seamlessly across the surface of the floor in a non-directional or monolithic installation. Merge-ability enables mixing dye lots and saves money by allowing you to add new or replace worn or damaged tiles without worrying about dye lot compatibility.
- Mergeable design - eliminates worry about matching dye lots
- No fade – solution-dyed yarn prevents fading
- Non-directional install method – easy to install and replace
- Durable – rated for high traffic
- Superior static control performance – meets the most stringent ESD standards including ANSI/ESD S20.20 and IEC 61340-5-1:2016*
- Lifetime warranty for static control.
- Static dissipative – meets standards for electronics manufacturing, telecom and government spaces**
ShadowFX™ Planx offer a more expressive visual vocabulary.
Our 25cm x 1m Shadow FX ESD Planx bring new proportion and scale to carpet tile, giving you power to create fresh, exciting floor designs. The scale and directionality of Shadow FX ESD Planx creates floors that better reflect the geometry and flow of the surrounding space.
Planx or squares, our tiles all work together.
Use square tiles with contrasting Skinny Planks for large-scale tile patterns, provide wayfinding cues, or for work and activity zones. And this is just the beginning!
StaticWorx modular carpet tile and Planx work together in any combination, giving you a carpet tile design platform with unparalleled options.
A shape that’s better at hiding seams.
Want the benefits of carpet tile without the look of carpet tile? Use Shadow FX ESD Planx, same style and color, laid in an ashlar pattern. They’ll blend near seamlessly across the floor, giving you the benefits of modularity and the continuous look of broadloom.
A soft hard surface.
Love the look of wood plank flooring? Think luxury vinyl plank flooring is stunning? Patterns—like herringbone or ashlar—give ShadowFX Planx the visual appeal of other plank floors, with the patterning possibilities. You also get a floor covering that’s soft, quiet and much more economical than hard surfaces.
With StaticWorx ESD flooring, you never have to choose between performance and aesthetics. Our beautiful, high quality ESD carpet tile, vinyl, EC rubber tile and sheet goods, and ESD epoxy floors are as beautiful as they are functional.