StatBond Pressure-sensitive Permanent Adhesive

Looking to reduce installation labor, install tile faster, get on the floor sooner and eliminate downtime and shutdowns? StaticWorx has your solution.

The Problem

Most suppliers provide carbon black and dark graphite adhesives. These adhesives are troweled on the floor and the tiles must be placed while the adhesive is still wet. This yields a slow and messy installation. Dark wet adhesive often seeps through the seams when the floor is rolled. The only way to contain the mess from seepage is to wipe off tiles with solvents and mineral spirits and rollers while the adhesive is still wet. If the adhesive is allowed to dry, the floor tiles are stained.

The Solution

Background image is Dave Long, President of StaticWorx, holding a black of wood. A weight had been attached to the underside of the plank by conductive adhesive, demonstrating that the adhesive is strong enough to affix a heavy weight. In the foreground at the bottom are two boxes. The top is a bright blue with the StaticWorx logo. The second is a dark blue-gray and includes the text in white: “ESD Tile Installation – Which Adhesive Should You Use?”
Play Video
Background image is Dave Long, President of StaticWorx, holding a black of wood. A weight had been attached to the underside of the plank by conductive adhesive, demonstrating that the adhesive is strong enough to affix a heavy weight. In the foreground at the bottom are two boxes. The top is a bright blue with the StaticWorx logo. The second is a dark blue-gray and includes the text in white: “ESD Tile Installation – Which Adhesive Should You Use?”
Play Video

StaticWorx developed StatBond pressure-sensitive permanent adhesive to replace wet set adhesives. StatBond eliminates messy installations. Unlike wet-set epoxies and conductive one-part acrylic emulsions, StatBond is allowed to dry completely before tiles are installed. This eliminates seepage during rolling. The adhesive bonds upon contact, allowing the floor to receive immediate traffic.

StatBond enables your installation team to install our precision-milled tiles up to 30% faster than other products. And because our tiles are produced with the best squareness tolerances in the industry, you won’t see any adhesive in the seams. And the best part: You can install StatBond in occupied spaces.

The Benefits

$ Lower Cost

StatBond can be applied over almost any surface, cleanly and easily- resulting in an economical installation.

No Shutdowns

StatBond is odorless and certified for emissions by FloorScore. With StatBond adhesive, the floor is ready for traffic within 40 minutes of installation – allowing the installer to lay tile without interrupting the client’s operation. This means no shutdowns and immediate access to the space after the tiles are placed.

Tighter Installation, with No Gaps Between Seams

Working on a dry pressure-sensitive adhesive enables the installer to employ the pyramid installation method for large areas. This method reduces the possibility of variance and cutbacks found in jobs where the tile was installed in rows. It also helps prevent gaps because the geometry of fitting tiles into a pyramid (instead of linear rows) forces the tiles to fit together tighter. A gap-free installation yields a cleaner facility because there are no seams to trap dirt and other contaminates.

Background image is a photo of a contractor installing ESD tile using the pyramid method.In the foreground at the bottom are two boxes. The top is a bright blue with the StaticWorx logo. The second is a dark blue-gray and includes the text in white: “Installing Our ESD Tile Fast and Easy Using Pyramid Method"
Play Video

Downloads

Get in Touch

The form below will help us better understand your needs and get you as quickly as possible to the right person. We look forward to helping you solve your static problem! 

You can expect a response within 24 hours. For faster service, please give us a call: 617-923-2000

Visit our privacy policy to find out how we process data.

Twitter
LinkedIn
Facebook
Reddit
Pinterest
Email
Background graphic is a still from the StaticWorx GroundSafe ESD Flooring – Your Trusted Partner explainer animation. In the foreground at the bottom are two boxes. The top is a bright blue with the StaticWorx logo and "GroundSafe ESD Flooring" underneath in white. The second is a dark blue-gray and includes the text in white: “GroundWorx ESD Flooring – Your Trusted Partner”
Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.